Edge® Readers/Controllers
EdgeReader ERP40 82125
Provides multi-technology card processing. Reads HID Prox, iCLASS®, DESFire® • ISO 15693 CSN (MyD, I Code, Tag It), ISO14443A CSN (MIFARE®), FeliCa™ CSN, Simple igration from HID Proximity to iCLASS.
Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies Built on the HID OPIN™ platform and managed from a host application. Ideally suited for today’s IT-centric security environment. Mounting Single-gang style electrical box
Dimensions
3.3″ W x 4.8″ H x 1.5″ D (83.8 mm x 121.9 mm x 36.3 mm)
Weight
6.8 oz (.195 kg)
Style
Attractive UL94 polycarbonate enclosure protects components from damage and all connections are fully identified by silk- screened nomenclature.
Card Data Formats
Supports any card data format up to 128 bits
Hardware
32-bit RISC CPU, 100 MHz processor
Memory
8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM
Visual Indicators
Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements
1 A @ 12-16 VDC maximum
Recommended:
Power is supplied using the Power over Ethernet technology available with PoE (802.3af) enabled network devices.
Alternate:
Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
Relays can be configured to supply power as follows:
Available Power: The E400 is capable of supplying a total of 700 mA to field devices. This power may be shared between a reader and one or two additional field devices.
Unpowered, relay contacts are rated for 2 A @ 30 VDC
The EdgeReader is intended for use in indoor environments that comply with the following specifications:
Operating Temperature
32° to 122° F (0° to 50° C)
Operating Humidity
5% to 95% relative, non-condensing
Communication Ports Ethernet – 10 or 100 Mbps
RS-232 – port for Modem or connectivity to other systems.
Reader - Wiegand, HID Clock and Data, or in iClass RS-232
Certifications
UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification, EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan
Warranty
Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
EdgeReader ER40 82120
Stores up to 44,000 cards or credentials directly from the host. 255 configurable priorities for supervised inputs/alarms. Incorporates the HID OPIN Technology TCP/IP API with an available Windows DLL tool. Built-in 802.3af Power over Ethernet (PoE), with 600mA available for external field devices. Accepts local connection option via laptop for diagnostics and configuration. Connects to host on the IP network. Controls and powers all access devices at the door. Buffers up to 5,000 transactions if communication is disrupted with host and uploads when
network communications is restored. Controls and reports any passback (hard/soft/med). RS-232 serial port for optional back-up via modem.
Dimensions
3.3″ W x 4.8″ H x 2.3″ D (83.8 mm x 121.9 mm x 57.9 mm)
Weight
14.7 oz (.400 kg)
Card Data Formats
Supports any card data format up to 128 bits
Hardware
32-bit RISC CPU, 100 MHz processor
Memory
8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM
Visual Indicators
Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements
1 A @ 12-16 VDC maximum
Relays can be configured to supply power as follows:
Available Power: The EdgeReader is capable of supplying a total of 600 mA to field devices.
Unpowered, relay contacts are rated for 2 A @ 30 VDC
The EdgeReader is intended for use in indoor environments that comply with the following specifications:
Operating Temperature
32° to 122° F (0° to 50° C)
Operating Humidity
5% to 95% relative, non-condensing
Communication Ports Ethernet – 10 or 100 Mbps
RS-232 – port for Modem or connectivity to other systems.
Certifications
UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification (FCC Class A Verification for reader portion only.) EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan
Warranty
Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
EdgeReader ERW400 82121
Stores up to 44,000 cards or credentials directly from the host. 255 configurable priorities for supervised inputs/alarms. Incorporates the HID OPIN Technology TCP/IP API with an available Windows DLL tool. Built-in 802.3af Power over Ethernet (PoE), with 600mA available for external field devices. Accepts local connection option via laptop for diagnostics and configuration. Connects to host on the IP network. Controls and powers all access devices at the door. Buffers up to 5,000 transactions if communication is disrupted with host and uploads when network communications is restored. Controls and reports any passback (hard/soft/med). RS-232 serial port for optional back-up via modem.
Mounting
Single-gang style electrical box
Dimensions
3.3″ W x 4.8″ H x 2.3″ D (83.8 mm x 121.9 mm x 57.9 mm)
Weight
14.7 oz (.400 kg)
Style
Attractive UL94 polycarbonate enclosure protects components from damage and all connections are fully identified by silk-screened nomenclature.
Card Data Formats
Supports any card data format up to 128 bits
Hardware
32-bit RISC CPU, 100 MHz processor
Memory
8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM
Visual Indicators
Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements
1 A @ 12-16 VDC maximum
Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af) enabled network devices.
Alternate: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
Relays can be configured to supply power as follows:
Available Power: The EdgeReader is capable of supplying a total of 600 mA to field devices.
Unpowered, relay contacts are rated for 2 A @ 30 VDC
The EdgeReader is intended for use in indoor environments that comply with the following specifications:
Operating Temperature
32° to 122° F (0° to 50° C)
Operating Humidity
5% to 95% relative, non-condensing
Communication Ports Ethernet – 10 or 100 Mbps
RS-232 – port for Modem or connectivity to other systems.
Certifications
UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification (FCC Class A Verification for reader portion only.) EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan
Warranty
Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
EdgePlus E400 82000
Connects with and stores a complete access control and configuration database for one controlled door and 44,000 cardholders. 255 configurable priorities for supervised inputs/alarms. Compatible reader protocols includes all wiegand or HID formats up to 128 bits and iCLASS RS-232. Incorporates the HID OPIN Technology TCP/IP API with an available Windows DLL tool. Enables IP-based, two-way communication with iCLASS reader/writer, LCD keypad and biometric reader products. Built-in 802.3af Power over Ethernet (PoE), with 700mA available for external field devices. Accepts local connection option via laptop for diagnostics and configuration. Connects to host on the IP network. Controls and powers all access devices at the door. Buffers up to 5,000 transactions if communication is disrupted with host and uploads when network communications are restored. Controls and reports any passback (hard/soft/med). RS-232 serial port for optional back-up via modem.
Mounting
Single-gang style electrical box
Dimensions
3.3″ W x 4.8″ H x 1.5″ D (83.8 mm x 121.9 mm x 36.3 mm)
Weight
6.8 oz (.195 kg)
Style
Attractive UL94 polycarbonate enclosure protects components from damage and all connections are fully identified by silk- screened nomenclature.
Card Data Formats
Supports any card data format up to 128 bits
Hardware
32-bit RISC CPU, 100 MHz processor
Memory
8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM
Visual Indicators
Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements
1 A @ 12-16 VDC maximum
Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af) enabled network devices.
Alternate: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
Relays can be configured to supply power as follows:
Available Power: The E400 is capable of supplying a total of 700 mA to field devices. This power may be shared between a reader and one or two additional field devices.
Unpowered, relay contacts are rated for 2 A @ 30 VDC
The EdgeReader is intended for use in indoor environments that comply with the following specifications:
Operating Temperature
32° to 122° F (0° to 50° C)
Operating Humidity
5% to 95% relative, non-condensing
Communication Ports Ethernet – 10 or 100 Mbps
RS-232 – port for Modem or connectivity to other systems.
Reader - Wiegand, HID Clock and Data, or in iClass RS-232
Certifications
UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification, EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan
Warranty
Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
EdgeReader Solo ESR40 83120
Embedded User Interface, no external software requirement. Remotely managed via standard web browser. Works within DHCP or Static IP networks for plug and play installation. “Door Dashboard” accesses door commands, status, alarms, and recent events from all screens. Back-up and restore of data from user PC. Built-in diagnostics. Installer “calling card” allows inclusion of contact information for user support. User upgradable firmware. Built-in help screens. Manages 1000 cardholders/credentials. Manages 8 schedules and 3 intervals each day of the week including holidays. View last 5000 events. Standardized report generation, including CSV export
Built-in 802.3af Power over Ethernet (PoE), with 600 mA available for external field devices and locking hardware. Easily migrates to a host based system – (OEM OR CS)
After upgrade:
40,000 credentials
65000 Schedules
Full Edge/VertX® capacities
Wet or Dry door relays
Permits local laptop computer connections for diagnostics and configuration
Dimensions
3.3″ W x 4.8″ H x 2.3″ D (83.8 mm x 121.9 mm x 57.9 mm)
Weight
14.7 oz (.400 kg)
Card Data Formats
Supports any card data format up to 128 bits
Hardware
32-bit RISC CPU, 100 MHz processor
Memory
8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM
Visual Indicators
Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements
1 A @ 12-16 VDC maximum
Relays can be configured to supply power as follows:
Available Power : The EdgeReader is capable of supplying a total of 600 mA to field devices.Unpowered, relay contacts are rated for 2 A @ 30 VDC
The EdgeReader is intended for use in indoor environments that comply with the following specifications:
Operating Temperature
32° to 122° F (0° to 50° C)
Operating Humidity
5% to 95% relative, non-condensing
Communication Ports Ethernet – 10 or 100 Mbps
Certifications
UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification (FCC Class A Verification for reader portion only.) EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan
Warranty
Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
EdgeReader Solo ESRP40 83125
Control all functions for a single door and HID multiCLASS reader in one device with the same footprint as a traditional reader. Reads HID Prox, iCLASS®, DESFire® • ISO 15693 CSN (MyD, I Code, Tag It), ISO14443A CSN (MIFARE®), FeliCa™ CSN, Simple migration from HID Proximity to iCLASS.
Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies. Built on the HID OPIN™ platform and managed from a standard web browser, the EdgeReader Solo can be easily migrated to a host environment.
The User Interface is embedded, so no external software is required. And the EdgeReader Solo ESRP40 works within DHCP or Static IP networks for plug and play installation. A “Door Dashboard” accesses door commands, status, alarms, and recent events from all screens and provides standardized reporting , (including CSV export). Allows a view of the last 5000 events. And provide built-in help screens to assist at any time. The user upgradable firmware will come ready to store 1000 cardholders/credentials and manage 8 schedules and 3 intervals each day of the week including holidays. After upgrade, 40,000 credentials, 65,000 Schedules and full EDGE/VertX® capabilities are realized.
EdgeReader Solo ESRP40 IP Access Solution also features back-up and restore of data from user PC. And permits local laptop computer connections for diagnostics and configuration.
EdgePlus Solo ES400 83000
Embedded User Interface, no external software requirement. Remotely managed via standard web browser. Works within DHCP or Static IP networks for plug and play installation. “Door Dashboard” accesses door commands, status, alarms, and recent events from all screens. Back-up and restore of data from user PC. Built-in diagnostics. Installer “calling card” allows inclusion of contact information for user support. User upgradable firmware. Built-in help screens. Manages 1000 cardholders/credentials. Manages 8 schedules and 3 intervals each day of the week including holidays. View last 5000 events. Standardized report generation, including CSV export
Built-in 802.3af Power over Ethernet (PoE), with 600 mA available for external field devices and locking hardware. Easily migrates to a host based system – (OEM OR CS).
After upgrade:
40,000 credentials
65000 Schedules
Full Edge/VertX? Capacities
Wet or Dry door relays
Permits local laptop computer connections for diagnostics and configuration
Dimensions
3.3″ W x 4.8″ H x 1.5″ D 83.8 mm x 121.9 mm x 36.3 mm)
Weight
6.8 oz (.195 kg)
Card Data Formats
Supports any card data format up to 128 bits
Hardware
32-bit RISC CPU, 100 MHz processor
Memory
8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM
Visual Indicators
Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements
1 A @ 12-16 VDC maximum
Relays can be configured to supply power as follows:
Available Power: The E400 is capable of supplying a total of 700 mA to field devices. This power may be shared between a reader and one or two additional field devices.
Unpowered, relay contacts are rated for 2 A @ 30 VDC
The ES400 is intended for use in indoor environments that comply with the following specifications:
Operating Temperature
32° to 122° F (0° to 50° C)
Operating Humidity
5% to 95% relative, non-condensing
Communication Ports Ethernet 10 or 100 Mbps
Reader - Wiegand, HID Clock and Data
Certifications
UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification, EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan
Warranty
Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).